2026 Landoll 845-AG Series 845-48

2026 Landoll 845-AG Series 845-48

HAUL MORE WITH LANDOLL HAULOLL DETACHABLE

The new 845 Hauloll is designed to move today and tomorrow’s heaviest equipment. The 845’s 45-ton capacity is matched to handle even the heaviest of the field-ready tractors and choppers in production today. The heavy haul requirement was carefully considered during the product development of the 845 resulting in a trailer that comes standard with a Heavy-Duty Gooseneck with provisions for a 36” Flip extension.

Most 2-axle base trailers run out of GVWR to legally permit many heavier loads. The Landoll 845 tops out at 116,500 lbs. / 51,076 KG GVWR allowing for a full 90,000 lbs. of payload. The trailer equipped with the gooseneck extension and the third flip axle will scale even the toughest ag tractors. Each state DOT controls the exact weights you can transport on their highways.

The 845 is built for the heavy haul and it comes standard with REGEN-HOSS hydraulics, the new hydraulic-regeneration valve system with Rexroth valve rated at 2500 PSI and 20 GPM. That is a significant increase in hydraulic speed, decreasing the amount of time it takes to load equipment.

Features may include

• Capacity* 45 Tons (90,000 lbs.)

• Dual Deck Rating 90,000 lbs. in 16', 80,000 lbs. in 12'

• Estimated Base Weight 21,800 lbs. (845-48HD) +/- 3%

• Main Frame Fabricated 13" Beam, 100,000 PSI Yield Flanges

• Deck Width 102"

• Loaded Deck Height 19-1/4"

• Loaded Ground Clearance 7"

• Decking 1-1/2" Nominal, Apitong Full Width

• Crossmembers 8" x 3" Rect Tube on 18" Centers

• Hitch Patented Automatic Gooseneck Lock Engagement

• Gooseneck 12' Heavy Duty (Includes Flip Brackets)

• Pin Setting 15"

• Swing Clearance 84"

• Side Extension 27" Aluminum Telescoping Side Extensions (Lower Deck) (Capacity 9,000 lbs. each)

• Accessories 845HD-AG 48' and 53' Frame Prepared w/Flip Bkts

• Electric and Air for 3rd Axle Flip, includes Frame Provision for Hydraulic Flip (Adds components for Rear Trunnion and Bumper)

• Hydraulic Flip Option Not Available on 845E-53HD-AG-S60

• Tool Box None Standard

• Gooseneck Tie Downs D-Rings: (2) Each at Front Corner; (2) Each at Back

• Lower Deck Tie Downs Side Mounted D-Rings on 36" Centers

• Rear Trunnion Tie Downs D-Rings: (2) Each at Base Flush Mounted on Top of Inner Beams; (2) Each Web Mounted on Top; (2) Each Rear Flush Mounted on Top of Inner Beams; (2) Each Top of Slope (Outer web)

• Suspension Neway Air Ride, 25,000 lbs. Capacity

• Grease Centralized Grease System

• Axles (2) 25,000 lbs. Axles, Dual Tire, Oil Bath Bearings, Automatic Slack Adjusters

• Axles Prepped for Air Inflation

• Brakes 16.5 x 7 Full Air / Spring Brakes, ABS 4S2M

• Tires 255/70R 22.5 LRH Double Coin

• Rims 22.5 x 8.25 Steel

• Wheels Steel Hub Pilot

• Oil Seal Hubs Internal Mated Assembly